OctoPrint Anywhere: Access OctoPrint Remotely Over the Internet
2/24/2020: OctoPrint Anywhere is being deprecated and replaced with The Spaghetti Detective. The Spaghetti Detective is from the same developer and adds new features like automatic failure detection!
This guide will show you how to access OctoPrint over the Internet (from anywhere) using the OctoPrint Anywhere plugin, allowing you to monitor your prints from your phone or other remote device. OctoPrint itself is [intentionally] limited to connections over your local network. But what happens if you want to monitor your print from work, the bus, or the coffee shop?
This is where OctoPrint Anywhere steps in. It allows you to securely control the core features of OctoPrint over the Internet without needing to mess with port forwarding on your router. OctoPrint Anywhere is free to use for your first printer, plus $5 per month for each additional printer.
Safety meeting: You should never leave your 3D printer unattended, no matter which printer you have. This guide is meant to let you monitor your 3D printer remotely, but you should ensure a spouse, coworker, roommate or friend is near your printer while printing in the case of an emergency.
Posted in these interests:
With OctoPrint Anywhere, you’ll be able to monitor your printer’s live video feed, control your bed and extruder temperatures, pause and cancel prints, control your stepper motors, and more.
One thing it doesn’t do is allow you to load new prints. This is currently a requested feature and, as the plugin author notes:
I have not considered remote job starting as a feature on the roadmap because I think, more often than not, a user will have to do some work (taking previous print off the plate, leveling the bed, making sure the filament is what you want, etc) on the printer before kicking off the job.
I suppose this makes sense. After all, your print surface isn’t normally prepped while you’re away. Still, I look forward to this feature being added in the future and the existing print control features are still more than worth it.
Of course, be sure to install OctoPrint first before performing this guide.
On your OctoPrint-connected network, turn on your printer and Raspberry Pi (or other OctoPrint-enabled device) and log into the control panel: http://octopi.local/
Click the settings icon in the top-right and then select “Plugin Manager”. Then, click “Get More…”
Type “octoprint anywhere” into the search box and click “Install”. It may take several minutes to download and install.
When it finishes, click the “Restart now” button.
You’ll need to create a free account and register your printer with OctoPrint Anywhere. To do this, click “Register my 3D printer on getanywhere.io“.
After registering and creating your account, you will immediately see your printer feed. IT’S BLACK MAGIC, I SAY!
Rename your printer
Click the triple dots and then “Preferences” and change the printer name from “My First 3D Printer” to whatever you’d like.
Optional: Enable Bandwidth Saving
This option reduces the amount of data that’s sent to your phone while viewing the interface. This option reduces the bandwidth streamed to the device you’re viewing OctoPrint Anywhere from. I recommend turning this on if you’re accessing from a mobile device and have limited bandwidth, but this will reduce streaming quality.
You can now log into OctoPrint Anywhere from your phone by visiting https://www.getanywhere.io/.
The basic interface here allows you to mission-critical the basic OctoPrint controls, including:
- Pause and stop prints
- Checking the live status of your print
- Viewing the webcam video feed
- Monitor and control your bed and nozzle temperatures
- Control your axes/stepper motors
- Check the status of multiple 3D printers from one place
If you run into any issues, post in the comments section below and I’ll do my best to help you out. Or, check out the Issues section of the official OctoPrint Anywhere Github repository.
OctoPrint Anywhere: Access OctoPrint Remotely Over the Internet
2/24/2020: OctoPrint Anywhere is being deprecated and replaced with The Spaghetti Detective. The Spaghetti Detective is from the same developer and adds new features like automatic failure detection!
This guide will show you how to access OctoPrint over the Internet (from anywhere) using the OctoPrint Anywhere plugin, allowing you to monitor your prints from your phone or other remote device. OctoPrint itself is [intentionally] limited to connections over your local network. But what happens if you want to monitor your print from work, the bus, or the coffee shop?
This is where OctoPrint Anywhere steps in. It allows you to securely control the core features of OctoPrint over the Internet without needing to mess with port forwarding on your router. OctoPrint Anywhere is free to use for your first printer, plus $5 per month for each additional printer.
Safety meeting: You should never leave your 3D printer unattended, no matter which printer you have. This guide is meant to let you monitor your 3D printer remotely, but you should ensure a spouse, coworker, roommate or friend is near your printer while printing in the case of an emergency.
Posted in these interests:
With OctoPrint Anywhere, you’ll be able to monitor your printer’s live video feed, control your bed and extruder temperatures, pause and cancel prints, control your stepper motors, and more.
One thing it doesn’t do is allow you to load new prints. This is currently a requested feature and, as the plugin author notes:
I have not considered remote job starting as a feature on the roadmap because I think, more often than not, a user will have to do some work (taking previous print off the plate, leveling the bed, making sure the filament is what you want, etc) on the printer before kicking off the job.
I suppose this makes sense. After all, your print surface isn’t normally prepped while you’re away. Still, I look forward to this feature being added in the future and the existing print control features are still more than worth it.
Of course, be sure to install OctoPrint first before performing this guide.
On your OctoPrint-connected network, turn on your printer and Raspberry Pi (or other OctoPrint-enabled device) and log into the control panel: http://octopi.local/
Click the settings icon in the top-right and then select “Plugin Manager”. Then, click “Get More…”
Type “octoprint anywhere” into the search box and click “Install”. It may take several minutes to download and install.
When it finishes, click the “Restart now” button.
You’ll need to create a free account and register your printer with OctoPrint Anywhere. To do this, click “Register my 3D printer on getanywhere.io“.
After registering and creating your account, you will immediately see your printer feed. IT’S BLACK MAGIC, I SAY!
Rename your printer
Click the triple dots and then “Preferences” and change the printer name from “My First 3D Printer” to whatever you’d like.
Optional: Enable Bandwidth Saving
This option reduces the amount of data that’s sent to your phone while viewing the interface. This option reduces the bandwidth streamed to the device you’re viewing OctoPrint Anywhere from. I recommend turning this on if you’re accessing from a mobile device and have limited bandwidth, but this will reduce streaming quality.
You can now log into OctoPrint Anywhere from your phone by visiting https://www.getanywhere.io/.
The basic interface here allows you to mission-critical the basic OctoPrint controls, including:
- Pause and stop prints
- Checking the live status of your print
- Viewing the webcam video feed
- Monitor and control your bed and nozzle temperatures
- Control your axes/stepper motors
- Check the status of multiple 3D printers from one place
If you run into any issues, post in the comments section below and I’ll do my best to help you out. Or, check out the Issues section of the official OctoPrint Anywhere Github repository.
OctoPrint Anywhere: Access OctoPrint Remotely Over the Internet
2/24/2020: OctoPrint Anywhere is being deprecated and replaced with The Spaghetti Detective. The Spaghetti Detective is from the same developer and adds new features like automatic failure detection!
This guide will show you how to access OctoPrint over the Internet (from anywhere) using the OctoPrint Anywhere plugin, allowing you to monitor your prints from your phone or other remote device. OctoPrint itself is [intentionally] limited to connections over your local network. But what happens if you want to monitor your print from work, the bus, or the coffee shop?
This is where OctoPrint Anywhere steps in. It allows you to securely control the core features of OctoPrint over the Internet without needing to mess with port forwarding on your router. OctoPrint Anywhere is free to use for your first printer, plus $5 per month for each additional printer.
Safety meeting: You should never leave your 3D printer unattended, no matter which printer you have. This guide is meant to let you monitor your 3D printer remotely, but you should ensure a spouse, coworker, roommate or friend is near your printer while printing in the case of an emergency.
Posted in these interests:
With OctoPrint Anywhere, you’ll be able to monitor your printer’s live video feed, control your bed and extruder temperatures, pause and cancel prints, control your stepper motors, and more.
One thing it doesn’t do is allow you to load new prints. This is currently a requested feature and, as the plugin author notes:
I have not considered remote job starting as a feature on the roadmap because I think, more often than not, a user will have to do some work (taking previous print off the plate, leveling the bed, making sure the filament is what you want, etc) on the printer before kicking off the job.
I suppose this makes sense. After all, your print surface isn’t normally prepped while you’re away. Still, I look forward to this feature being added in the future and the existing print control features are still more than worth it.
Of course, be sure to install OctoPrint first before performing this guide.
On your OctoPrint-connected network, turn on your printer and Raspberry Pi (or other OctoPrint-enabled device) and log into the control panel: http://octopi.local/
Click the settings icon in the top-right and then select “Plugin Manager”. Then, click “Get More…”
Type “octoprint anywhere” into the search box and click “Install”. It may take several minutes to download and install.
When it finishes, click the “Restart now” button.
You’ll need to create a free account and register your printer with OctoPrint Anywhere. To do this, click “Register my 3D printer on getanywhere.io“.
After registering and creating your account, you will immediately see your printer feed. IT’S BLACK MAGIC, I SAY!
Rename your printer
Click the triple dots and then “Preferences” and change the printer name from “My First 3D Printer” to whatever you’d like.
Optional: Enable Bandwidth Saving
This option reduces the amount of data that’s sent to your phone while viewing the interface. This option reduces the bandwidth streamed to the device you’re viewing OctoPrint Anywhere from. I recommend turning this on if you’re accessing from a mobile device and have limited bandwidth, but this will reduce streaming quality.
You can now log into OctoPrint Anywhere from your phone by visiting https://www.getanywhere.io/.
The basic interface here allows you to mission-critical the basic OctoPrint controls, including:
- Pause and stop prints
- Checking the live status of your print
- Viewing the webcam video feed
- Monitor and control your bed and nozzle temperatures
- Control your axes/stepper motors
- Check the status of multiple 3D printers from one place
If you run into any issues, post in the comments section below and I’ll do my best to help you out. Or, check out the Issues section of the official OctoPrint Anywhere Github repository.
OctoPrint Anywhere: Access OctoPrint Remotely Over the Internet
2/24/2020: OctoPrint Anywhere is being deprecated and replaced with The Spaghetti Detective. The Spaghetti Detective is from the same developer and adds new features like automatic failure detection!
This guide will show you how to access OctoPrint over the Internet (from anywhere) using the OctoPrint Anywhere plugin, allowing you to monitor your prints from your phone or other remote device. OctoPrint itself is [intentionally] limited to connections over your local network. But what happens if you want to monitor your print from work, the bus, or the coffee shop?
This is where OctoPrint Anywhere steps in. It allows you to securely control the core features of OctoPrint over the Internet without needing to mess with port forwarding on your router. OctoPrint Anywhere is free to use for your first printer, plus $5 per month for each additional printer.
Safety meeting: You should never leave your 3D printer unattended, no matter which printer you have. This guide is meant to let you monitor your 3D printer remotely, but you should ensure a spouse, coworker, roommate or friend is near your printer while printing in the case of an emergency.
Posted in these interests:
OctoPrint Anywhere: Access OctoPrint Remotely Over the Internet
octoprintpi3dprintingPosted in these interests:
We’re hiring. Write for Howchoo
With OctoPrint Anywhere, you’ll be able to monitor your printer’s live video feed, control your bed and extruder temperatures, pause and cancel prints, control your stepper motors, and more.
One thing it doesn’t do is allow you to load new prints. This is currently a requested feature and, as the plugin author notes:
I have not considered remote job starting as a feature on the roadmap because I think, more often than not, a user will have to do some work (taking previous print off the plate, leveling the bed, making sure the filament is what you want, etc) on the printer before kicking off the job.
I suppose this makes sense. After all, your print surface isn’t normally prepped while you’re away. Still, I look forward to this feature being added in the future and the existing print control features are still more than worth it.
Of course, be sure to install OctoPrint first before performing this guide.
On your OctoPrint-connected network, turn on your printer and Raspberry Pi (or other OctoPrint-enabled device) and log into the control panel: http://octopi.local/
Click the settings icon in the top-right and then select “Plugin Manager”. Then, click “Get More…”
Type “octoprint anywhere” into the search box and click “Install”. It may take several minutes to download and install.
When it finishes, click the “Restart now” button.
You’ll need to create a free account and register your printer with OctoPrint Anywhere. To do this, click “Register my 3D printer on getanywhere.io“.
After registering and creating your account, you will immediately see your printer feed. IT’S BLACK MAGIC, I SAY!
Rename your printer
Click the triple dots and then “Preferences” and change the printer name from “My First 3D Printer” to whatever you’d like.
Optional: Enable Bandwidth Saving
This option reduces the amount of data that’s sent to your phone while viewing the interface. This option reduces the bandwidth streamed to the device you’re viewing OctoPrint Anywhere from. I recommend turning this on if you’re accessing from a mobile device and have limited bandwidth, but this will reduce streaming quality.
You can now log into OctoPrint Anywhere from your phone by visiting https://www.getanywhere.io/.
The basic interface here allows you to mission-critical the basic OctoPrint controls, including:
- Pause and stop prints
- Checking the live status of your print
- Viewing the webcam video feed
- Monitor and control your bed and nozzle temperatures
- Control your axes/stepper motors
- Check the status of multiple 3D printers from one place
If you run into any issues, post in the comments section below and I’ll do my best to help you out. Or, check out the Issues section of the official OctoPrint Anywhere Github repository.
With OctoPrint Anywhere, you’ll be able to monitor your printer’s live video feed, control your bed and extruder temperatures, pause and cancel prints, control your stepper motors, and more.
One thing it doesn’t do is allow you to load new prints. This is currently a requested feature and, as the plugin author notes:
I have not considered remote job starting as a feature on the roadmap because I think, more often than not, a user will have to do some work (taking previous print off the plate, leveling the bed, making sure the filament is what you want, etc) on the printer before kicking off the job.
I suppose this makes sense. After all, your print surface isn’t normally prepped while you’re away. Still, I look forward to this feature being added in the future and the existing print control features are still more than worth it.
With OctoPrint Anywhere, you’ll be able to monitor your printer’s live video feed, control your bed and extruder temperatures, pause and cancel prints, control your stepper motors, and more.
One thing it doesn’t do is allow you to load new prints. This is currently a requested feature and, as the plugin author notes:
I have not considered remote job starting as a feature on the roadmap because I think, more often than not, a user will have to do some work (taking previous print off the plate, leveling the bed, making sure the filament is what you want, etc) on the printer before kicking off the job.
I suppose this makes sense. After all, your print surface isn’t normally prepped while you’re away. Still, I look forward to this feature being added in the future and the existing print control features are still more than worth it.
OctoPrint Anywhere features
Of course, be sure to install OctoPrint first before performing this guide.
On your OctoPrint-connected network, turn on your printer and Raspberry Pi (or other OctoPrint-enabled device) and log into the control panel: http://octopi.local/
Of course, be sure to install OctoPrint first before performing this guide.
On your OctoPrint-connected network, turn on your printer and Raspberry Pi (or other OctoPrint-enabled device) and log into the control panel: http://octopi.local/
Log into OctoPrint
Click the settings icon in the top-right and then select “Plugin Manager”. Then, click “Get More…”
Click the settings icon in the top-right and then select “Plugin Manager”. Then, click “Get More…”
Access the Plugin Manager
Type “octoprint anywhere” into the search box and click “Install”. It may take several minutes to download and install.
When it finishes, click the “Restart now” button.
Type “octoprint anywhere” into the search box and click “Install”. It may take several minutes to download and install.
When it finishes, click the “Restart now” button.
Install the OctoPrint Anywhere plugin
You’ll need to create a free account and register your printer with OctoPrint Anywhere. To do this, click “Register my 3D printer on getanywhere.io“.
You’ll need to create a free account and register your printer with OctoPrint Anywhere. To do this, click “Register my 3D printer on getanywhere.io“.
Register your printer
After registering and creating your account, you will immediately see your printer feed. IT’S BLACK MAGIC, I SAY!
Rename your printer
Click the triple dots and then “Preferences” and change the printer name from “My First 3D Printer” to whatever you’d like.
Optional: Enable Bandwidth Saving
This option reduces the amount of data that’s sent to your phone while viewing the interface. This option reduces the bandwidth streamed to the device you’re viewing OctoPrint Anywhere from. I recommend turning this on if you’re accessing from a mobile device and have limited bandwidth, but this will reduce streaming quality.
After registering and creating your account, you will immediately see your printer feed. IT’S BLACK MAGIC, I SAY!
Rename your printer
Click the triple dots and then “Preferences” and change the printer name from “My First 3D Printer” to whatever you’d like.
Optional: Enable Bandwidth Saving
This option reduces the amount of data that’s sent to your phone while viewing the interface. This option reduces the bandwidth streamed to the device you’re viewing OctoPrint Anywhere from. I recommend turning this on if you’re accessing from a mobile device and have limited bandwidth, but this will reduce streaming quality.
Rename your printer and enable Bandwidth Saving
You can now log into OctoPrint Anywhere from your phone by visiting https://www.getanywhere.io/.
The basic interface here allows you to mission-critical the basic OctoPrint controls, including:
- Pause and stop prints
- Checking the live status of your print
- Viewing the webcam video feed
- Monitor and control your bed and nozzle temperatures
- Control your axes/stepper motors
- Check the status of multiple 3D printers from one place
You can now log into OctoPrint Anywhere from your phone by visiting https://www.getanywhere.io/.
The basic interface here allows you to mission-critical the basic OctoPrint controls, including:
- Pause and stop prints
- Checking the live status of your print
- Viewing the webcam video feed
- Monitor and control your bed and nozzle temperatures
- Control your axes/stepper motors
- Check the status of multiple 3D printers from one place
The basic OctoPrint Anywhere interface
If you run into any issues, post in the comments section below and I’ll do my best to help you out. Or, check out the Issues section of the official OctoPrint Anywhere Github repository.
If you run into any issues, post in the comments section below and I’ll do my best to help you out. Or, check out the Issues section of the official OctoPrint Anywhere Github repository.
Questions? Comments?
We’re hiring. Write for Howchoo
Want to support Howchoo? When you buy a tool or material through one of our Amazon links, we earn a small commission as an Amazon Associate.